A discussion of music and guitar gear...
Friday, December 10, 2010
Subscribe to:
Post Comments (Atom)
4 Cable Method
With the 4CM method, you are connecting things as you would with a normal effects chain. Normal chain would be something like:
Guitar > Wah/volume/distortion stomp boxes, etc > preamp > choruses, delays, reverb, etc > power amp > speaker/cabinets
If you use a 2 cable method like this:
Guitar > Boss or Line6 device > Amp input
Then any delay (for example) is then going to get distorted by the preamp in your amp. Maybe that's the sound you want, but generally you want delayed distortion, not distorted delay.
So, the 4CM method is:
Cable 1: Guitar output > Boss or Line6 device Input
Cable 2: Boss or Line6 device effect loop send > amp input
Cable 3: Amp effect loop send > Boss or Line6 device effect loop return
Cable 4: Boss or Line6 device output > amp effect loop return
This gives you a proper signal path:
Guitar > Boss or Line6 device > amp preamp > Boss or Line6 device > amp power amp
The send receive in your Boss or Line6 device effects path should be AFTER your comp/distortion/amp sims and BEFORE your chorous/delay/reverb effects.
Note that you can still put external pedals in the right places - i.e. real wah pedal before the Boss or Line6 device input or a distortion stomp box before the amp input and other effects processors in the loop before/after the Boss or Line6 device.
Guitar > Wah/volume/distortion stomp boxes, etc > preamp > choruses, delays, reverb, etc > power amp > speaker/cabinets
If you use a 2 cable method like this:
Guitar > Boss or Line6 device > Amp input
Then any delay (for example) is then going to get distorted by the preamp in your amp. Maybe that's the sound you want, but generally you want delayed distortion, not distorted delay.
So, the 4CM method is:
Cable 1: Guitar output > Boss or Line6 device Input
Cable 2: Boss or Line6 device effect loop send > amp input
Cable 3: Amp effect loop send > Boss or Line6 device effect loop return
Cable 4: Boss or Line6 device output > amp effect loop return
This gives you a proper signal path:
Guitar > Boss or Line6 device > amp preamp > Boss or Line6 device > amp power amp
The send receive in your Boss or Line6 device effects path should be AFTER your comp/distortion/amp sims and BEFORE your chorous/delay/reverb effects.
Note that you can still put external pedals in the right places - i.e. real wah pedal before the Boss or Line6 device input or a distortion stomp box before the amp input and other effects processors in the loop before/after the Boss or Line6 device.
Glenn,
ReplyDeletehey i know its after the new year... havent been on in awhile.. Great song .. thanks for sharing !
have a great new year !
Joe
Thanks so much for sharing, Glenn! What a wonderful song! Blessings... Bob
ReplyDeleteYou're welcome Bob.
ReplyDeleteHi Glenn
ReplyDeleteJust downloaded your GT 10 patches.....
NICE !!!!! (the dogs danglers).
I got cheap guitars (swap out pickups, machine heads, etc), and one of my guitars loves the Satriani patch.
My fingers hurt now after trying them all out.
All The Best !
1
ReplyDeletekeep up the good work
ReplyDelete